Back to Cleaners

MatraX Descarbosol

Cleaning detergent and anti-oxidation product for use in cleaning machines, hydraulic circuits, heat transfer oils and engines after long periods of use, aimed at eliminating sludge, grease, dirt and residue. Instructions: For circuits: Add Descarbosol to the oil contained in the machines and circuits (the equivalent to 10% of the circuit’s capacity). Leave to work for one or two hours, depending on the accumulated dirt; immediately after, empty the circuit. Fill with oil up to its normal level of operation. · For engines: Empty the engine’s oil at a hot temperature and leave to drain for 10 minutes. Fill the sump with Descarbosol at a LEVEL BETWEEN THE MAXIMUM AND MINIMUM indicated by the dipstick. Start the engine and let run slightly accelerated for 10 to 15 minutes . Immediately after, empty and leave to drain. Fill again with new oil.

Container sizes

Health and safety

May be fatal if swallowed and enters airways · IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician · Do NOT induce vomiting · Store locked up · Dispose of contents and / or containers in accordance with regulations on hazardous waste or packaging and packaging waste respectively.